Author Logo Pic

Alejandrina Gonzalez

ACORD 175 Form: Commercial Policy Change Request Explained

Insurance Compliance

|
Last updated ·
2026

Key takeaways

  • What it is: The ACORD 175 Commercial Policy Change Request is the standard two-page form for asking a carrier to change a commercial policy mid-term. The current edition is ACORD 175 (2016/03).
  • One form, many lines: It covers property, general liability, inland marine, auto, umbrella, workers' comp, truckers, business owners, and motor carrier policies. Complete only the sections that apply to the change.
  • Add, change, or delete: Every section (vehicles, drivers, premises, additional interests, workers' comp classes, GL hazards, property, scheduled equipment) has its own add / change / delete boxes.
  • It's a request, not a binder: The form says it acknowledges the request; the carrier adjusts its records only after approval, and any premium change comes at audit or by endorsement. Coverage isn't confirmed until the carrier approves (or you bind within your authority).
  • Reductions need the insured's signature: The form states that any deletion or reduction in coverage requires the insured's signature.
  • Personal lines use different forms: The ACORD 70 handles personal policy changes, and the ACORD 71 handles personal auto. Cancellations go on the ACORD 35.
  • Adding a vehicle mid-term: Complete the auto-vehicle description with VIN, garaging, use, coverages, deductibles, and any lienholder, and check the policy's newly acquired auto reporting rules.

The ACORD 175 is the form used to ask a carrier to change a commercial policy during its term: add or remove a vehicle, driver, location, additional interest, or class of business, or change limits.

This guide covers what the ACORD 175 form is, when to use it and when another form fits better, every section of the 2016/03 edition, a filled-in example for adding a vehicle mid-term, the other common commercial changes and what each needs, and the mistakes that create E&O claims.

If you’re looking for a faster way to gather all the necessary information behind each ACORD 175 to your team, Sonant can help: book a demo to see it at work with your own AMS.

What is the ACORD 175 form?

The ACORD 175, Commercial Policy Change Request, is ACORD's standard form for requesting an endorsement to an existing commercial policy.
It works across lines: the policy type box lists property, general liability, inland marine, auto, umbrella, workers' compensation, truckers, business owners, and motor carriers.

Current edition

The current edition is ACORD 175 (2016/03), a two-page form. Some carrier libraries still list older editions, so confirm what each carrier accepts and check the official ACORD website for any new version.

It's a request, not a binder

The form carries a printed acknowledgement of your request; upon approval, the company's records will be adjusted, and any premium adjustment will be made at premium audit or by endorsement.

In practice, it means that:

  • Coverage isn't changed until the carrier approves, unless you bind the change within your binding authority (and document it, for example on an ACORD 75 binder).
  • Premium may change later. Audited lines (workers' comp, GL, some auto) may settle the change at audit.
  • Some carriers prefer their portal. Many carriers process endorsements through their own systems; the ACORD 175 is the standard paper or PDF route and a good record for your file either way.

When and When NOT to use it

The change
Form
Add, change, or delete a vehicle, driver, location, additional interest, class code, limit, or scheduled item on a commercial policy
ACORD 175
Change a homeowners, dwelling, or other personal policy (except auto)
ACORD 70 Personal Policy Change Request
Change a personal auto policy
ACORD 71 Personal Auto Policy Change Request
Cancel a policy
ACORD 35 Cancellation Request / Policy Release
Move a client to a new agency mid-term
ACORD 36 Agent / Broker of Record Change
Add a new line of coverage (new policy)
A new application: ACORD 125 plus the line section
Large changes, such as a new fleet or a big acquisition
Often a full section (ACORD 127, 140, 126) so the underwriter can re-evaluate; ask the carrier

‍

The ACORD 175, section by section

The following section names follow the ACORD 175 (2016/03). Complete the header on every request, then only the sections the change touches. Every section has its own Add / Change / Delete boxes, so check one for each item.

Page 1

  1. Header. Date; agency name, address, contact, phone, fax, email, code, sub code, and agency customer ID; carrier and NAIC code; policy number; account number; effective date of change; policy inception and expiration dates; attention line; named insured.
  2. Insured's name and mailing address, if changed. Only when the change is to the insured's name or address (ZIP+4). A named insured change, such as a new entity, may need underwriting approval, so describe it in remarks.
  3. Policy type. Check the policy being changed: property, general liability, inland marine, auto, umbrella, workers' comp, truckers, businessowners, or motor carriers. If a change touches several policies (a new location affects property, GL, and workers' comp), the form can carry all of them, but many carriers want one request per policy.
  4. Short description of changes / remarks. A plain summary of what's changing and why, with the ACORD 101 if you need more room. This is the first thing the endorsement processor reads.
  5. Auto: vehicle description and limits. Two vehicle blocks per page, each with add / change / delete:
  • vehicle number, year, make, model, body type, VIN, and vehicle type (private passenger, special, or commercial);
  • garaging address (street required in Kentucky), registration state, territory, GVW/GCW, class, SIC, factor, seating capacity, radius, and farthest terminal;
  • use (service, retail, commercial, farm, pleasure, drive to work or school, for hire);
  • coverages for the unit (liability, no-fault, medical payments, UM, UIM, towing and labor, comprehensive or specified causes of loss, collision, rental reimbursement);
  • cost new, symbol and age, ACV or stated amount, and deductibles.
  1. Auto: policy limit(s) changed. Liability, no-fault, additional no-fault, medical payments, uninsured and underinsured motorists.
  2. Premises information. Location and building number, full address, inside or outside city limits, owner or tenant, year built, and part occupied; plus the nature of business and description of operations at each premises.
  3. Driver information. Add, change, or delete drivers, including those who frequently use their own vehicles on company business: name, address, sex, marital status, date of birth, years of experience, year licensed, license number and state, Social Security number, hire date, vehicle assignment and use percentage.

Page 2

  1. Additional interest. Add, change, or delete: interest type (additional insured, employee as lessor, lender's loss payable, lienholder, loss payee, mortgagee, owner, registrant), name and address, rank, whether evidence or a certificate is required, reference or loan number, and the item it applies to (vehicle, boat, location, building, or airport).
  2. Workers compensation rating information. Type of change, state, location, class code, description code, the duties for that class, full-time and part-time employees, and estimated annual payroll.
  3. General liability: limits change and schedule of hazards. New limits (each occurrence, aggregates, personal and advertising injury, damage to rented premises, medical expense, employee benefits); and classification changes with location, hazard number, class code, premium basis code, exposure, and territory.
  4. Umbrella change. New limit of liability, retained limit, or other change.
  5. Property / inland marine: premises information. Premises and building numbers, then subject of insurance, amount, coinsurance, valuation, causes of loss, inflation guard, deductible, and forms; plus the COPE fields (construction, protection class, stories, year built, area, building updates, fire and burglar alarms, exposures).
  6. Inland marine: scheduled equipment. Year, description, model and serial numbers, purchase date, new or used, and amount of insurance, with the coinsurance percentage.
  7. Signatures. Producer’s name, signature, state producer license number (required in Florida), and national producer number; the insured's signature and date. The form states that any deletion or reduction in coverage requires the insured's signature.

Filled-in example: adding a vehicle mid-term

The following names and figures are all illustrative.

An electrical contractor with a business auto policy buys a new pickup, financed through a bank, and a new hire will drive it.

Header and description

Field
Entry
Policy type
Auto
Policy number / carrier / NAIC
From the declarations
Effective date of change
11/20/2026 (the date the client takes delivery)
Policy inception / expiration
03/01/2026 to 03/01/2027
Short description of changes
Add 2026 Ford F‑250 (Veh #5), garaged at 88 Industrial Rd; add driver Luis Ortega (Driver #6); add First Regional Bank as lienholder on Veh #5.

‍

Auto: vehicle description (Add)

Field
Entry
Veh # / year / make / model / body type
5 / 2026 / Ford / F‑250 / pickup
VIN
Full 17 characters, from the bill of sale or registration
Vehicle type
Commercial
Garaging address
88 Industrial Rd (the overnight location, not the office)
GVW / class / radius
From the vehicle specs and the carrier’s class rules; local radius
Use
Service
Coverages
Liability, UM/UIM per the policy, comprehensive, collision
Cost new / valuation
Purchase price; ACV
Deductibles
Comprehensive $500, collision $1,000, matching the rest of the fleet

‍

Driver information (Add)

Driver #6, Luis Ortega: date of birth, license number and state, years of experience, hire date, assigned to Veh #5 at 100% use.

Additional interest (Add, page 2)

Lienholder: First Regional Bank, with its address and the loan number, item class "Vehicle," item 5.

Before sending it

  • Check the newly acquired auto provision. Many business auto policies cover a newly acquired auto for a limited time if the insured reports it within a set window. The window and conditions depend on the policy form and covered auto symbols, so check the policy rather than assume.
  • Confirm the symbol covers it. If physical damage is written on symbol 7 (specifically described autos), the new vehicle has physical damage coverage only once it's added under the policy's terms.
  • Run the new driver's MVR if the carrier or your process requires it, before the driver is approved.
  • Don't issue ID cards or certificates for the new unit until the carrier confirms the change, unless you've bound it within your authority.

Other common commercial changes and what each needs

When one event touches several policies, such as a new location, keep one internal checklist so no carrier is missed: property, GL, workers' comp, auto (garaging), umbrella, and any certificates or evidence that list locations.

Change
ACORD 175 section
What to collect
Watch out for
Delete a vehicle
Auto: vehicle description (Delete)
Vehicle number, VIN, date sold or removed
Insured’s signature (a reduction in coverage); release the lienholder; update the umbrella schedule
Add or remove a driver
Driver information
License number and state, date of birth, hire date
MVR before approval; excluded-driver rules vary by carrier and state
Add a location
Premises information; property section; GL schedule of hazards; workers’ comp rating if staff work there
Address, occupancy, operations, area, sales or payroll, COPE, values
One location can touch several policies; tell each carrier
Add an additional insured
Additional interest (Add)
Exact name and address, contract requirements
The endorsement (blanket or scheduled) is what grants coverage; the request only asks for it
Add a mortgagee or loss payee
Additional interest (Add)
Exact clause, loan number, item it applies to
Issue evidence (ACORD 27 or 28) only after the carrier endorses it
Increase GL limits
General liability: limits change
New limits and why (often a contract)
Check whether the umbrella’s underlying requirements change too
Add a workers’ comp class
Workers compensation rating information
State, class code, duties, headcount, estimated payroll
Classify by duties, not job titles
Increase a building limit
Property / inland marine: premises information
New amount and its source (appraisal, estimate)
Coinsurance; update the lender’s evidence afterward
Add scheduled equipment
Inland marine: scheduled equipment
Description, model and serial number, purchase date, value
Coinsurance on the equipment schedule
Change the named insured or address
Insured’s name and mailing address, if changed
New legal name or address, reason
An entity change may need underwriting review; update certificates
Change umbrella limits
Umbrella change
New limit and retained limit
Underlying limits must still meet the carrier’s minimums

‍

Common ACORD 175 mistakes and the E&O risk behind them

Policy changes are routine, which is exactly why they go wrong. The gap between "the client told us" and "the carrier endorsed it" is where most E&O claims on changes start.

Mistake
What goes wrong
How to prevent it
Telling the client “you’re covered” when the request is only submitted
A loss before approval isn’t covered, and the agency owns the gap
Bind only within your authority and document it; otherwise confirm coverage after the carrier approves
No effective date, or the wrong one
Coverage starts later than the client expects
Use the actual date of acquisition, hire, or move
Vague description (“add truck”)
Processor guesses, or the change is rejected
Write who, what, where, and when in the short description
VIN or garaging errors
Wrong vehicle rated or misrating
Copy VINs from the bill of sale; use the overnight garaging address
Reduction or deletion without the insured’s signature
Disputes when a loss hits the removed coverage
Get the insured’s signature, as the form requires
Lienholder or mortgagee left off
Lender not protected; evidence can’t be issued
Capture every interest with loan numbers and the item it applies to
Certificates or ID cards issued before approval
Third parties rely on coverage that isn’t in place yet
Wait for confirmation, or bind within authority first
Only one policy updated when the change affects several
A new location covered on property but not GL or workers’ comp
Check every policy the change touches, including the umbrella
Request submitted but never followed up
Endorsement never processed
Diary a follow-up and reconcile the endorsement when it arrives
No record of what was requested and when
Hard to show the agency acted promptly
Save the signed ACORD 175, the submission confirmation, and the endorsement in the AMS

‍

ACORD 175 fillable, and running policy changes as a workflow

Where to get a legitimate ACORD 175

The ACORD 175 is licensed like every ACORD form, and agencies usually get it one of two ways:

  • Your AMS. Applied Epic, AMS360, EZLynx, HawkSoft, and others generate the ACORD 175 from the policy record. 
  • An ACORD forms license. Per ACORD's FAQ, agencies are licensed through an ACORD program membership with a forms license, or through authorized software plus an ACORD End User License.
  • Carrier portals. Many carriers prefer endorsements through their own systems. Even then, the ACORD 175 or your AMS endorsement record is a useful internal record of what was requested and when.

Where Sonant fits

Policy changes almost always start with a phone call: a new truck, a new hire, a new location, a lender's request. Sonant's AI Receptionist routes those calls to the right person: it verifies the caller, looks up the client's policies in the AMS live, and answers 24/7. It collects the details the change needs, such as the vehicle's year, make, model, VIN, garaging address, and lienholder, or the new driver's name and license, and writes a structured task into the AMS, routed to the client's assigned account manager. Your licensed team still decides whether to bind, completes the ACORD 175, and submits it; they start from a complete request instead of a voicemail and a callback.

At Cornerstone Insurance Services, triaging phone traffic into ready-to-work Applied Epic tasks took the team from 70 to 100 tasks a day, a 43% productivity gain.‍

See it on your own AMS with a demo.

A simple change-request workflow

  1. Capture the request completely on the first contact: what's changing, the effective date, and every detail the section needs (VIN, license, address, values, interest).
  2. Check binding authority. If you can bind the change, do it and document it; if not, tell the client coverage is pending.
  3. Submit the ACORD 175 or portal request, with any supporting documents.
  4. Follow up until the carrier confirms, and check the endorsement against the request.
  5. Issue what depends on it: ID cards, certificates, and evidence for lenders.
  6. Log every note in the client's AMS record.

‍

Disclaimer: All product names, logos, and brands are the property of their respective owners. ACORD® is a registered mark of ACORD Corporation. Applied Epic™ and EZLynx™ (Applied Systems), AMS360™ (Vertafore), and HawkSoft™ are trademarks of their respective companies. SONANT™ is a trademark of Bluberry AI, Inc. No affiliation, endorsement, or sponsorship is implied. Form details are current as of November 2026 and subject to change; verify with ACORD and each carrier before submitting.

Frequently asked questions

What is the ACORD 175 form?

The ACORD 175 Commercial Policy Change Request is ACORD's standard form for requesting a mid-term change to a commercial policy. It covers property, general liability, inland marine, auto, umbrella, workers' comp, truckers, businessowners, and motor carrier policies, with add, change, and delete sections for each kind of change.

‍

When do I use the ACORD 175?

Whenever a commercial client needs a mid-term change: adding or removing a vehicle, driver, location, additional interest, workers' comp class, or scheduled equipment, or changing limits. Personal lines changes use the ACORD 70 or 71, and cancellations use the ACORD 35.

‍

What do I fill in to add a vehicle?

The header with the effective date of change, the Auto policy type, a short description, and the auto-vehicle description marked Add: VIN, year, make, model, garaging, use, coverages, cost new, and deductibles. Add any new driver and the lienholder on page 2.

‍

Does submitting an ACORD 175 mean the change is covered?

No. The form is an acknowledgement of the request; the carrier adjusts its records after approval. Unless you bind within your authority, confirm coverage only once the carrier approves.

‍

Does the insured need to sign the ACORD 175?

The form states that any deletion or reduction in coverage requires the insured's signature. Getting the insured's signature on every change is good practice.

‍

What is the current ACORD 175 edition?

ACORD 175 (2016/03), a two-page form. Confirm at acord.org/forms and with each carrier.

‍

Can one ACORD 175 change several policies?

The form lists several policy types, so it can describe a change that touches more than one. Many carriers prefer one request per policy; follow each carrier's instructions.

‍

Where can I get an ACORD 175 fillable PDF?

From your agency management system or other ACORD-authorized software, under an ACORD forms license.

‍

Get the latest insights on
Agency Growth